Nt402 Msds ((free)): Nitocote

For Xylene, the typical 8-hour TWA (Time Weighted Average) is 100 ppm (435 mg/m³) ACGIH. The MSDS will state that users should stay below these limits. Section 9: Physical and Chemical Properties These properties explain why the behavior of Nitocote NT402 is predictable.

Before opening the first can, read the MSDS. Before cleaning a roller, read the MSDS. Before calling an ambulance, read the MSDS. Your safety, and the safety of your crew, depends on it. This article is for informational purposes only and does not replace the official MSDS provided by Fosroc for the specific batch of Nitocote NT402 you possess. Always refer to the actual manufacturer-certified SDS for legal compliance and emergency procedures. Regulations vary by country and state. Consult a certified industrial hygienist or safety professional for site-specific advice. nitocote nt402 msds

| Exposure Route | Control Measure | Recommended PPE | | :--- | :--- | :--- | | | Local exhaust ventilation (LEV) | Half-face or full-face respirator with Organic Vapor (OV) cartridges (e.g., NIOSH approved 6001). | | Skin (Hands) | Chemical barrier | Nitrile gloves (0.4mm thickness, >480 min breakthrough time). Do not use latex or neoprene – they degrade quickly with aromatics. | | Skin (Body) | Avoid splashes | Tyvek or chemical-resistant apron. | | Eyes | Splash guard | Chemical splash goggles (not just safety glasses). | | Footwear | Spill resistance | Rubber boots with steel toe (leather absorbs solvent). | For Xylene, the typical 8-hour TWA (Time Weighted