Neoprogrammer | V22010 New
A: No – NeoProgrammer is Windows-only for direct USB interfaces. For Pi, use flashrom .
Enter —the spiritual successor that took the open-source groundwork of AsProgrammer and supercharged it. Recently, the development team released NeoProgrammer v2.2.0.10 (the "v22010 new" build) , marking a significant leap forward in chip support, stability, and user experience. If you rely on a CH341A, FTDI, or similar USB programmer, this update is mandatory. neoprogrammer v22010 new
| Feature | NeoProgrammer v22010 + CH341A | Xgecu T48 (Commercial) | | :--- | :--- | :--- | | | $5 (hardware only) | $90+ | | Chip Support | Excellent (SPI, I2C, Microchip) | Superior (also supports parallel, PIC, EEPROM) | | Speed | Moderate (max 24 KB/s SPI write) | Fast (200+ KB/s) | | Software Updates | Frequent (open source) | Occasional (closed source) | | 1.8V Support | Requires adapter (sold separately) | Built-in level shifters | | Best For | Hobbyists, BIOS repair, monitor EDID | Professional lab, large-scale flashing | A: No – NeoProgrammer is Windows-only for direct
A: In the new version, go to Chip > Unprotect . For older hardware, you may need to temporarily short the WP# pin to VCC (3.3V). Recently, the development team released NeoProgrammer v2
The world of firmware repair, BIOS recovery, and EEPROM programming is niche but critical. For technicians, hardware enthusiasts, and data recovery specialists, a reliable programmer is the bridge between a "bricked" device and a fully functional one. For years, the go-to solutions were SPI Flash Programmer (based on the CH341A hardware) and the now-defunct AsProgrammer .
A: False positive. The software directly accesses hardware (I/O ports), which heuristics sometimes flag as "suspicious". Add an exception. NeoProgrammer v2.2.0.10 new – finally, a free programmer that works the way it should. Download it today and bring your dead electronics back to life.