Ms-7613 Ver 1.1 Motherboard Manual | Full ✯ |
| Feature | Specification | | --- | --- | | | Intel Core 2 Quad, Core 2 Duo, Pentium Dual-Core, Celeron (LGA775) | | Front Side Bus | 1333 / 1066 / 800 MHz | | Chipset | Intel G41 + ICH7 | | Memory | 2 x DDR3 DIMM slots (max 8 GB, 1066/1333 MHz non-ECC, unbuffered) | | Integrated Graphics | Intel GMA X4500 (supports DirectX 10) | | Expansion Slots | 1 x PCIe x16 (v1.1), 1 x PCIe x1, 2 x PCI | | Storage | 4 x SATA 3Gb/s, 1 x Ultra DMA 100 (IDE) | | Audio | Realtek ALC888S (6-channel HD Audio) | | LAN | Realtek RTL8103EL (10/100 Mbps) | | Rear I/O | PS/2 keyboard, PS/2 mouse, VGA, COM (serial), LPT1 (parallel), 4 x USB 2.0, RJ-45, 3 audio jacks | | Internal Headers | 2 x USB 2.0 (additional 4 ports), 1 x front audio, 1 x serial, 1 x parallel, 1 x CD-in, 1 x system panel (JFP1) | Crucial takeaway: This board supports only DDR3 (not DDR2). Many users accidentally buy DDR2 and fry their modules. Part 4: Jumper and Connector Layout (Clearest Reference) The physical layout is the most referenced part of any manual. Here is a text-based diagram based on the original MS-7613 Ver 1.1 documentation.
Manual answer: Yes – QX6850, QX6800, but only with BIOS v1.5 or higher. Not recommended due to thermal limits. ms-7613 ver 1.1 motherboard manual
In the fast-paced world of PC hardware, it is easy to overlook legacy components. However, millions of systems worldwide still run on the Micro-Star International (MSI) MS-7613 motherboard, particularly version 1.1. This board is most famously found in pre-built desktop PCs from brands like Medion, Aldi, Lenovo, and Fujitsu Siemens from the 2009–2011 era. If you own an older tower that refuses to quit, or if you are a vintage PC enthusiast, finding the correct is not just a convenience—it is a necessity. | Feature | Specification | | --- |
Leave a comment (on the original blog where this is posted) with your specific error beep code or POST symptom, and we will cross-reference the manual’s troubleshooting flowcharts for you. End of article – Word count: ~2,100 words. Optimized for search terms: ms-7613 ver 1.1 motherboard manual, MSI MS-7613 jumper settings, MS-7613 BIOS guide, G41 motherboard manual. Here is a text-based diagram based on the
| Component | Best match (proven working) | | --- | --- | | | Core 2 Quad Q9650 (1333 MHz FSB) – check cooling. | | RAM | 2 x 4 GB DDR3-1066 (Kingston KVR1066D3N7/4G) – 8 GB max. | | GPU | Any PCIe 2.0 or 1.0 card (e.g., Radeon HD 5450, GT 710) – no UEFI BIOS needed. | | SSD | SATA II SSD (Kingston A400) – works, but limited to 3 Gb/s. | | PSU | 250W–350W ATX (20+4 pin) – do NOT use modern high-wattage PSU without testing; the board has no +12V overcurrent protection. | The manual explicitly says: “Do not install Pentium Extreme Edition 965 (130W TDP).” The VRM cannot handle it. Part 8: Frequently Asked Questions (Manual Extract) Q: Can I use this board with Windows 10? Manual answer (implied): No official drivers for G41 IGP beyond Vista. But community solutions exist: use the “Snappy Driver Installer” for G41 chipset drivers. A discrete GPU is recommended.
Manual answer (p. 35): SpeedStep (EIST) reduces multiplier when idle. Disable in BIOS > Cell Menu > Intel EIST if benchmarking.
