Manual Alpina It 31015 May 2026

A: No. The manual states the IT 31015 has a 30-minute continuous duty cycle (S6 40%). Let it cool for 10 minutes. If the smell persists, check for dull blades (overloading the motor). Conclusion: Why the Manual Alpina It 31015 is Your Long-Term Partner The Alpina IT 31015 is a beast of a machine—powerful, precise, and built to last decades. But without its manual, it is just a heavy, confusing box of metal and wires. The Manual Alpina It 31015 transforms that complexity into clarity.

| Frequency | Task | | :--- | :--- | | | Vacuum dust from the chip chute. Check for loose screws. | | Every 10 hours | Lubricate the threaded thicknessing rod with lithium grease. | | Every 30 hours | Remove the top cover and blow out motor housing with compressed air. | | Every 50 hours | Inspect drive belts for cracking. Replace in pairs. | | Blade Change | Rotate or replace carbide blades after 100 linear meters of hardwood, or immediately if you see burn marks on the wood. | Manual Alpina It 31015

By following the setup instructions, respecting the safety protocols, and adhering to the maintenance schedule outlined in this guide (and the original document), you will achieve perfectly flat, smooth, and dimensionally accurate wood every single time. If the smell persists, check for dull blades