Ga naar registratie

Benefits at Work
header_login_header_asset

Klarisa Imut 103-07 Min [ SAFE — 2025 ]

Remember to respect its duty cycle, pair it with a proper coupling, and always verify your source to avoid counterfeits. With proper care, the Klarisa Imut 103-07 Min will deliver thousands of hours of silent, precise motion. Disclaimer: Specifications are based on commonly available data as of 2025. Always consult the official datasheet for your specific production batch. "Klarisa Imut" is a registered trademark. This article is for informational purposes only.

| Feature | Klarisa Imut 103-07 Min | Generic Chinese 100-series | Siemens GCA series | |---------|-------------------------|----------------------------|--------------------| | Price (USD) | $89 - $120 | $45 - $70 | $200+ | | Torque density | Excellent (12 Nm @ 0.7A) | Poor (8 Nm @ 1.2A) | Good (15 Nm @ 0.9A) | | Noise level | <45 dB | >55 dB | <40 dB | | Availability | Moderate (specialty distributors) | High (online marketplaces) | High (industrial supply) | | "Min" customizability | Yes (no feedback pot) | No (fixed config) | No | Klarisa Imut 103-07 Min

Use M4 bolts through the four mounting lugs. Do not overtighten (max torque 2 Nm). The unit must be mounted with the shaft horizontal unless otherwise specified in your addendum. Remember to respect its duty cycle, pair it

Remember to respect its duty cycle, pair it with a proper coupling, and always verify your source to avoid counterfeits. With proper care, the Klarisa Imut 103-07 Min will deliver thousands of hours of silent, precise motion. Disclaimer: Specifications are based on commonly available data as of 2025. Always consult the official datasheet for your specific production batch. "Klarisa Imut" is a registered trademark. This article is for informational purposes only.

| Feature | Klarisa Imut 103-07 Min | Generic Chinese 100-series | Siemens GCA series | |---------|-------------------------|----------------------------|--------------------| | Price (USD) | $89 - $120 | $45 - $70 | $200+ | | Torque density | Excellent (12 Nm @ 0.7A) | Poor (8 Nm @ 1.2A) | Good (15 Nm @ 0.9A) | | Noise level | <45 dB | >55 dB | <40 dB | | Availability | Moderate (specialty distributors) | High (online marketplaces) | High (industrial supply) | | "Min" customizability | Yes (no feedback pot) | No (fixed config) | No |

Use M4 bolts through the four mounting lugs. Do not overtighten (max torque 2 Nm). The unit must be mounted with the shaft horizontal unless otherwise specified in your addendum.