Verified | Ka 54 Remsl Top

The math is clear: the TOP grade pays for itself in avoided production losses within the first eight months of continuous operation. Q1: Is the KA 54 REMSL TOP interchangeable with the older KA 42 or KA 66 models? A: Not directly. The mounting hole pattern and rod diameter scale with the number (42mm, 54mm, 66mm). However, adapter plates can be machined if stroke length is identical.

A: Absolutely not. Pneumatic cylinders have thinner walls and different seals. Hydraulic pressures (1500+ psi) will rupture a pneumatic KA 54. Always order the specifically rated hydraulic variant. ka 54 remsl top

| Parameter | Typical Value / Range | | :--- | :--- | | | Pneumatic rotary clamp or linear actuator with guidance | | Bore Diameter | 54 mm (standardized within the KA family) | | Stroke Length | Available in 25, 50, 75, 100 mm options – custom lengths on request | | Operating Pressure | 2 to 10 bar (pneumatic) / up to 160 bar (hydraulic variants) | | Operating Temperature | -20°C to +80°C (standard seals); TOP grade: -30°C to +150°C with FKM/Viton seals | | Mounting Style | Flange (front/rear), foot mounting, or threaded nose – configurable | | Material (Body) | Hard-anodized aluminum alloy AW-6060 T6 (standard); TOP grade: Nickel-plated ductile iron | | Seal Material | NBR (standard); TOP grade: FKM / PTFE composite for chemical resistance | | Max. Clamping Force | 2.5 kN (pneumatic) / 12 kN (hydraulic) | | Repetition Accuracy (TOP) | ±0.02 mm | | Corrosion Protection (REMSL) | Salt spray tested >500 hours per ISO 9227 (due to stainless steel + coating) | The math is clear: the TOP grade pays