Truth: No. ISO 2768-2 ties symmetry directly to the tolerance grade. Class "m" symmetry = 0.5mm (same as flatness for a 200mm part). Conclusion: Master the Standard, Master the Shop The search for "iso 2768 general tolerances pdf exclusive" usually comes from a place of urgency—a drawing is on the table, a CNC is waiting, and the title block only says "ISO 2768-m."
| Nominal Length Range (mm) | f (Fine) | m (Medium) | c (Coarse) | v (Very Coarse) | | :--- | :--- | :--- | :--- | :--- | | Up to 10 | 0.02 | 0.05 | 0.1 | 0.2 | | >10 to 30 | 0.05 | 0.1 | 0.2 | 0.4 | | >30 to 100 | 0.1 | 0.2 | 0.4 | 0.8 | | >100 to 300 | 0.2 | 0.5 | 1.0 | 2.0 | | >300 to 1000 | 0.3 | 0.8 | 1.5 | 3.0 | | >1000 to 3000 | 0.4 | 1.0 | 2.0 | 4.0 | iso 2768 general tolerances pdf exclusive
| Nominal Size Range (mm) | f (Fine) | m (Medium) | c (Coarse) | v (Very Coarse) | | :--- | :--- | :--- | :--- | :--- | | 0.5 up to 3 | ±0.05 | ±0.1 | ±0.2 | - | | >3 up to 6 | ±0.05 | ±0.1 | ±0.3 | ±0.5 | | >6 up to 30 | ±0.1 | ±0.2 | ±0.5 | ±1.0 | | >30 up to 120 | ±0.15 | ±0.3 | ±0.8 | ±1.5 | | >120 up to 400 | ±0.2 | ±0.5 | ±1.2 | ±2.5 | | >400 up to 1000 | ±0.3 | ±0.8 | ±2.0 | ±4.0 | | >1000 up to 2000 | ±0.5 | ±1.2 | ±3.0 | ±6.0 | Angles are treated specially. For a 90° angle on a large part, a ±0.5° tolerance is massive. ISO 2768-1 uses short side length to determine tolerance. Truth: No
For professionals searching for the you are likely tired of generic, low-resolution charts or broken links. You need the authoritative standard explained in a way that saves time, reduces scrap rates, and ensures your parts fit on the first try. Conclusion: Master the Standard, Master the Shop The