Set 67 Part - Hmm Gracel

A: Partially. The guide rails are compatible with Set 55, but the mounting plate is different. The springs are exclusive to Set 67.

| Component | Quantity | Material | Tolerance | |-----------|----------|----------|-----------| | Guide Rail (Type 67-A) | 2 | Hardened Steel | ±0.01 mm | | Linear Bearing Block | 4 | Chrome-Plated Alloy | Class P5 | | Interface Mounting Plate | 1 | Anodized Aluminum | ±0.05 mm | | Tension Spring (Set 67-S) | 6 | Stainless Steel 304 | N/A | | Micro-Adjuster Screw | 8 | Brass with Nylon tip | 0.1 mm per turn | hmm gracel set 67 part

Unpack the set and verify all components against the table above. Look for burrs on the guide rails. Use a lint-free cloth and isopropyl alcohol to remove factory-preservation oil, except from the bearing blocks—they come pre-lubricated. A: Partially

Mount the two guide rails onto your base plate. Using a dial indicator, ensure parallelism within 0.02 mm over the entire length. Failure to do so will cause binding. | Component | Quantity | Material | Tolerance