Autosoft 7.0 Now

This article dives deep into the , exploring its design philosophy, step-by-step application, compatibility, pros and cons, troubleshooting tips, and how it compares to its predecessor, the Autosoft 90. What is the Autosoft 7.0? The Autosoft 7.0 is a tubed infusion set designed specifically for use with Tandem Diabetes Care insulin pumps, including the t:slim X2 and the new Mobi system. It is a manual insertion, 30-degree angled infusion set. The "7.0" in the name refers to the length of the tubing—70 centimeters (approximately 27 inches)—providing users with ample reach from the pump site to the infusion point.

Gently stretch the skin around the site to make it taut. Place the inserter device flat against the skin at a 90-degree angle (the device itself ensures the 30-degree cannula angle). Press the white button on top firmly. You will hear a "click" and feel a slight pinch. Autosoft 7.0

Peel away the paper liner covering the adhesive pad. Be careful not to touch the sticky surface. This article dives deep into the , exploring

Remove the Autosoft 7.0 from its sterile pouch. Do not touch the cannula or adhesive. Pull the blue needle cover straight off to expose the sterile introducer needle. It is a manual insertion, 30-degree angled infusion set

Wash your hands thoroughly. Clean the chosen site with an alcohol swab and allow it to dry completely. (Wet alcohol reduces adhesive stickiness and can sting upon insertion.)