ap: untar airap2800k9me831330tar flash: Now you need to tell the AP which file inside the tar to actually boot.
This file represents the end of an era for Cisco's standalone APs. Making it work correctly preserves valuable enterprise hardware that would otherwise be e-waste. Disclaimer: This guide is for educational and legacy system maintenance purposes. Cisco software is proprietary. Ensure you have a valid license and support agreement before downloading any firmware.
ap: ether tftp://192.168.1.50/airap2800k9me831330tar After the download completes (wait for "Bytes transferred"), you must manually extract:
ap: ether ftp://ftp_user:password@192.168.1.50/airap2800k9me831330tar
Introduction In the world of enterprise networking, few things are as stressful as a failed Access Point (AP) during a critical update. If you have landed on this page searching for the string "airap2800k9me831330tar download work" , you are likely staring at a console screen with a corrupted image, trying to revive a Cisco Aironet 2800 series access point.
ap: SET IP_ADDR 192.168.1.100 ap: SET NETMASK 255.255.255.0 ap: SET DEFAULT_ROUTER 192.168.1.1 ap: SET SERVER_IP 192.168.1.50 (Your FTP/TFTP server IP) You do not boot the .tar file. You extract it to the flash. This is where most users fail. Use the ether command.
